TM 9-4910-387-14-1
4-7. INSTALLATION INSTRUCTIONS
a. General. Recommended location for installation of the tester is
a protected area that is well lighted, dust free, sound absorbing, and
climate controlled. Recommended room temperature is 72 (22 ).
F
C
The space which the tester occupies must be large enough so that all
panels may be removed for periodic inspection and maintenance of the
tester.
(1) Place a level (1) across and then parallel to the mounting
rails (2) and level tester by placing shims (3) under the legs of the tester
as needed.
(2) Place a rubber foot pad (4) under each leg in addition to
any shims required.
c. Power Cable Installation.
WARNING
Main power supply must have the capability to shut
off power to the tester.
Shut off main power supply before installing power
cable.
(1) Remove LH panel assembly (1).
4-6