TM 9-4910-387-14-1
REMOVAL
NOTE
The auxiliary panel assembly is
only used when testing the
Cummins pump. Removal and
installation
procedures
are
1 BACK PANEL (1).
necessary only when replacing the
entire auxiliary panel assembly.
a. Remove six screws (2) using
Some auxiliary panel assemblies
cross tip screwdriver (3).
will not have a back panel or
attaching screws.
b. Remove.
NOTE
Remove plug slowly in
order to grasp float.
1 PLUG (1). Remove with 1-in. open
end wrench.
2 FIVE SCREWS (4) AND FIVE
WASHERS (5). Remove using
2 FLOAT (2). Remove.
cross tip screwdriver (6).
3 AUXILIARY PANEL
ASSEMBLY (7). Remove.
4-97