TM 9-4910-387-14-2
B.
HOLDING RELA MAY BE DEFECTIVE.
Y
NOTE
The following check is for resistance.
1 Connect one multimeter lead to holding relay coil contact (1) and
connect the other lead to holding relay coil contact (2).
2 Check for approximate resistance reading of 30 K ohms.
3 Check holding relay contacts to ensure that they are not burned or
welded together.
4 If resistance is not present or holding relay coil contacts are
damaged, replace the holding relay (3) (p 6-187).
5 If resistance circuit does not function, proceed to step C.
6-97
