TM 9-4910-387-14-2
NOTE
Refer to wiring diagram (p 6-146)
before connecting wires.
30 FOUR WIRES (73) WITH ONE TER-
MINAL LUG EACH. Install on two
terminals (74) and secure with two
clips (75), two lockwashers (76), and
two screws (77).
31 GREEN WIRE (78) WITH TERMINAL
LUG. Install on straight box connector
(72) and secure with screw (79).
32 TWO SCREWS (79 AND 80).
Tighten.
TEST
All controls and indicators on instrument panel
CAUTION
assembly must be tested for correct operation.
Make sure the iron core (81)
Refer to chapter 2, page 2-5, for explanation of
is inserted into the solenoid
operation of each control and indicator.
(82). If this is not done, the
solenoid will burn out when
power is turned on to the
tester and the START COUNT
button is pushed in.
6-291
