TM 9-4910-387-14-2
6-22. TRAY AND DISCHARGE BLOCKS ASSEMBLY-MAINTENANCE INSTRUCTIONS (cont)
INSTALLATION (cont)
6 REDUCER BUSHING (9), MALE RUN TEE (10), AND MALE
ELBOW (11). Install on lube oil pressure discharge block (12).
7 REDUCER BUSHING (13) AND MALE CONNECTOR (14). Install
on primer outlet discharge block (15).
CAUTION
Bulbs are fragile. Use care when removing or installing
bulbs to prevent damage.
8 ADAPTER (16) AND BULB (17) WITH BRAIDED TUBE (18).
Install on lube oil pressure discharge block (12).
9 FOUR COPPER TUBINGS (19 THRU 22). Install.
10 FIVE NUTS (23 THRU 27). Tighten.
11 MALE TEE (28), MALE ELBOW (29), MALE CONNECTOR (30),
AND MALE ELBOW (31). Install on fuel pressure discharge block
(32).
12 ADAPTER (33) AND BULB (34) WITH BRAIDED TUBE (35).
Install.
13 THREE COPPER TUBINGS (36, 37, AND 38). Install.
14 FOUR NUTS (39 THRU 42). Tighten.
6-390
