TM 9-4910-387-14-2
WARNING
Remove the drive unit assembly only with an available
forklift as the drive unit assembly weighs approximately
530 lbs (240.41 kg). Serious injury to personnel could
result if not careful.
NOTE
The drive unit assembly can only be removed from the front of the
tester.
19 DRIVE UNIT ASSEMBLY (29). Raise approximately 2 in. (5.08
cm).
20 REAR TIMING BELT (30). Remove.
CAUTION
Make sure a suitable sturdy frame is available on which
to rest the drive unit assembly.
21 DRIVE UNIT ASSEMBLY (29). Remove.
6-471
