TM 9-4910-387-14-2
TEST
NOTE
Hookup procedures for the
fuel injector pumps begin on
page 2-26.
For further
information on operating the
fuel injector pump, refer to
the appropriate fuel injector
pump manual. Use any fuel
injector pump which requires
a vacuum hookup.
1 TESTER. Hook up a fuel injector pump.
2 MAIN POWER SOURCE. Turn on.
3 500-1000-OFF COUNT SWITCH (1).
Set at 500.
4 FORWARD-OFF-REVERSE SWITCH
(2). Set al FORWARD.
5 AUXILIARY MOTOR SWITCH (3).
Turn on.
6 START BUTTON (4). Press in.
7 FUEL REGULATOR (5) AND LUBE OIL
REGULATOR (6). Adjust flow of fuel
and lube oil.
8 FUEL PRESSURE GAGE (7) AND
LUBE OIL PRESSURE GAGE (8).
Check for indication.
9 VACUUM-PRESS. SELECTOR VALVE
(9). Turn to VACUUM.
10 VACUUM REGULATOR (10). Adjust.
11 MANIFOLD VACUUM PRESSURE
GAGE (11). Check for indication.
6-545