TM 9-4910-387-14-2
TEST
NOTE
Hookup procedures for the fuel injector
pumps begin on page 2-26. For further
information on operating the fuel injector
pump, refer to the appropriate fuel injector
pump manual.
1 TESTER. Hook up a fuel injector pump.
2 MAIN. POWER SOURCE. Turn on.
3 500-1000-OFF COUNT SWITCH (1).
Set at
500.
4 FORWARD-OFF-REVERSE SWITCH (2). Set
at FORWARD.
5 AUXILIARY MOTOR SWITCH (3). Turn on.
6 START BUTTON (4). Press in.
7 FUEL REGULATOR (5). Adjust flow of fuel.
8 FUEL PRESSURE GAGE (6).
Check for
indication.
9 ENGINE PRIMER ASSEMBLY (7).
Pump
several times and check that fuel is entering
graduate rack assembly (8).
10 FUEL SYSTEM. Check for leaks.
6-605
