APPENDIX
BASIC ISSUE ITEMS LIST
Section I. INTRODUCTION
1. General
i. If DD Form 1348 (DOD Single Line Items
Requisition System Document (Manual)) is used, fill in
This appendix is a list of basic issue items. It is
all blocks except 4, 5, 6, and Remarks field, in
composed of those items which make up the major end
accordance with AR 725-50.
item of equipment and the operator's tools and
Complete form as follows:
equipment that are issued with the equipment and are
required for stockage.
(1) In blocks 4, 5, and 6, list the
manufacturer's code, and manufacturer's
2.
Requisitioning a Part to Which FSN Has Not
part number (as listed in description
Been Assigned
colm).
(2) In Remarks field, list noun name (repair
When requisitioning a C source (local procurement)
part), end item application (FSN of end
item identified only by a manufacturer's part number, it
item), manufacturer, model number (end
is mandatory that the following information be furnished
item), serial number (end item), and any
the supply officer:
other pertinent information such as frame
number, type, etc.
a. Manufacturer's code number (5
digit
No.
preceding the colon in the descriptive colm).
3. Explanation of Columns
b. Manufacturer's part number (the No., and
a. Source, Maintenance, and Recoverability Code
sometimes letters, following the colon, a above).
(colm 1).
Dashes, commas, or other marks must be included
exactly as listed.
(1) Materiel numerical codes (col 1a).
This column not required.
c. Nomenclature exactly as listed herein, including
(2) Source (colm 1b). This column indicates
dimensions if necessary.
the selection status and source for the
listed item. Source code used in this list
d. Name of manufacturer of end item (from cover
is
of TM or manufacturer's nameplate).
Code
Explanation
e. Federal stock number of end item (from TM).
C .................................. Obtain through local procure-
ment. If not obtainable from
f. Manufacturer's model number (from TM or
local procurement, requisition
name/data plate, preferably name/data plate).
through
normal
supply
channels with a supporting
g. Manufacturer's
serial
number
(from
statement of nonavailability
name/data plate).
from local procurement.
h. Any other information such as type, frame
(3) Maintenance level (colm 1c).
This
number, and electrical characteristics, if applicable.
column indicates the category of
maintenance authorized to install the
listed item. Maintenance level code used
in this list is-
8
