TM 9-4910-663-12
Items That May Be Tested (cent)
Table 2-1.1
Army part
Test setup
fig. no.
no.
Manufacturer
Item
Delco Remy
Starter
Delco Remy
Starter
Delco Remy
Starter
Delco Remy
Starter
Delco Remy
Starter
Delco Remy
Starter
Delco Remy
Starter
Starter
Delco Remy
Lear Siegler
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Prestolite
Starter
Lear Siegler
Starter
Leece Neville
Starter
a. Testing DC Generators (Without Regulators).
The noise level is high during operation of the
test stand. Wear an acoustical earmuff for
protection.
(An acoustical earmuff is provided
as an accessory with part number 7458-4.)
NOTE
This test procedure is only a typical procedure.
(1) Position test stand controls in accordance with table 2-1.
(2) Connect generator output to test stand GENERATOR binding
NOTE
When testing dc generators without a regulator, it
will be necessary to control generator output
voltage with the FIELD CURRENT controls (R26 and
2-32.1
Change 1