TM 9-4910-692-14&P
Stand, Radiator Test and Repair
MODELS E60 AND E60B
Your new Test and Repair Bench will accommodate radiators and heater cores from automobiles, trucks, tractors and
industrial equipment of any size that can be placed on the elevator platform. It is also used to test and repair condensers,
and evaporators in automotive and industrial air-conditioning systems.
This equipment is constructed of the highest quality material and is manufactured in accordance with strict quality
assurance standards. Developed from vast experience in this field, it is designed to serve you faithfully, economically, and
profitably for many years.
Your unit is equipped with an electrically operated drive system for positioning and holding the elevator platform in any
vertical position along its point of travel. When the radiator or object to be repaired is placed on the platform, it can be
lowered into the tank for testing and raised to a convenient height for repairing with minimum effort.
The information contained in this manual will help you take advantage of all the features built into your machine. Please
read the instructions carefully. If you have any questions regarding the installation or operation of this machine, do not
hesitate to contact us immediately.
1.
SPECIFICATIONS
MODEL E60
MODEL E60B
Overall Dimensions:
68" left to right
87" left to right
38-1/2" front to back
46-1/2" front to back
59" high
59" high
Electrical:
1/4 H.P. Motor 115/60/1
1/3 H.P. Motor 115/60/1
5.2 AMPS
6.2 AMPS
Net Weight:
450 lbs.
600 lbs.
BOTH UNITS
Drain:
2" diameter plug in tank bottom
Gas (Water
Column) Pressure:
4"-7" for Natural Gas;
11" for Bottled Gas
NOTE:
The following information and procedures apply to both the Model E60 and E60B.
2
