TM 9-4910-698-14&P
SETTING UP THE TS-10
The TS-10 is packed in its own metal carrying case. Prior to removing
the stand from the case, note the packing arrangement for future re-
packing. The TS-10 is packed in four components (DESCRIBED BELOW).
ITEMS
DESCRIPTION
COMPONENT
1 thru 7 & 15 thru 17
Upright and Platform Assembly
1.
Operating Wheel
8
2.
9 thru 14
3.
Handle Assembly
20
4.
Carrying Case
ASSEMBLY
Remove lid from carrying case (ITEM 20). Attach upright and
1.
platform assembly base (ITEM 1) to lid with screws (ITEM 18)
using wrench (ITEM 21). Tighten securely.
Thread operating wheel into handle assembly pivot (ITEM 12).
2.
Remove upper nut (ITEM 7), place pivot (ITEM 11) of operating
3.
wheel and handle assembly on upright (ITEM 5) as shown in
illustration and replace nut (ITEM 7). The basic stand is
ready for use.
For disassembly, simply reverse the above procedure.
4.
SETTING UP THE TS-15
The TS-15 is packed in four components (DESCRIBED BELOW).
ITEMS
DESCRIPTION
COMPONENT
thru 7 & 15 thru 17
Upright & Platform Assembly
1
1.
8
Operating Wheel
2.
9 thru 14
3.
Handle Assembly
4.
Mounting Plate
19
ASSEMBLY
1.
Attach upright and platform
rectangular pattern 4-5/8" x 7-5/8".
using wrench (ITEM 21). Tighten securely.
Thread operating wheel into handle assembly pivot (ITEM 12).
2.
Remove upper nut (ITEM 7), place pivot (ITEM 11) of operating
3.
wheel and handle assembly on upright (ITEM 5) as shown in
illustration and replace nut (ITEM 7). The basic stand is
ready to be permanently mounted to a bench.
7
