TM 9-4910-701-14&P
The model GH-G hydraulic dolly type jack is a lifting device with a cap-
acity of 4 ton (8000 lbs.). Designed for maintenance operations on
medium heavy equipment, the jack is equipped with dual pistons to enable
the operator to reach the load quickly.
The handle locks in two separate
positions, operates in a full 90 arc,and has all controls located at the
handle end for convenient operation.
Frame height . . . . . . . . . . . . ..7"
Overall width........l5-7/8"
Saddle low point . . . . . 5-1/16"
Saddle diameter . . . . . . . ...7-3/8"
Front wheel diameter . . ...4"
Saddle high point . . ..95-9/l6"
Length of chassis . . ..l8-l/4"
Caster wheel diameter . . ..2-16"l6"
Net weight . . . . . . . . . . . . . . .204 lbs.
Length of handle . . . ..46"
Overall length . . . . . . .92"
Place handle assembly in position.
1.
Insert fork pins, halfway into position.
2.
Insert spring, release rod assembly, and hanger.
3.
Push fork pins until they engage in holes in hanger.
4.
5.
Tighten set screw in handle to lock fork pins in position.
Insert pin A and fasten pin rings.
6.
Insert pin B and fasten clip.
7.
