TM 9-4935-481-14-1
Table 2-1. DMS-D Daily Services-Continued
Steps (perform in sequence
Item to
Before
During
After
be
Procedure
Reference or Action
Operation
Operation
Operation
Inspected
5
Cover
Inspect webb straps for
Repair as necessary.
Cable
damage.
Storage
6
18
Cable
Inspect the cables for accum-
Clean as required.
Assemblies
ulation of dirt, oil, grease,
Repair as necessary.
or other foreign material.
Inspect for visible damage
to insulation. Check con-
nectors for damage, bent
or missing pins.
7
19
Cable
Inspect for accumulation of
Clean as required.
Assembly
dirt, oil, grease, or other
Repair as necessary.
1W4
foreign material. Inspect
for visible damage. Check
insulation for cracks.
Check connectors for damage.
8
20
Optical
Inspect for accumulation of
Clean as required.
Element
dirt, oil, grease, or other
Repair as necessary.
Assembly
foreign material.
Inspect
for visible damage, broken
bead chain, missing quick
release pin, or damaged or
missing cushion pads.
Table 2-1. DMS-D Daily Services-Continued
Steps (perform in sequence
Item to
Before
During
After
be
Procedure
Reference or Action
Operation
Operation
Operation
Inspected
9
21
TTS E Cell
Inspect for accumulation
Clean as required.
Synchroni-
of dirt, oil, grease or
Repair as necessary.
zer Test
other foreign material.
Adapter.
Inspect for visible damage
to case. Check for dam-
aged plunger posts. Check
cable for damaged con-
nectors or broken insula-
tion.
10
22
Electronic
Inspect for accumulation of
Clean as required.
Card
dirt, oil, grease, or other
Repair as necessary.
foreign material. Inspect
for visible damage to cards,
broken wires, loose solder
connections, or damaged
connectors.
11
23
Photo
Inspect for accumulation of
Refer to radiometer
Semicon-
dirt, oil, grease, or other
manual for cleaning and
ductor
foreign material. Inspect
corrective action
connector for damage. Inspect
procedures.
for damage to housing. Check
detector for cracked or
broken element.
2-4
