TM 9-2330-381-14
KEY
EXPECTED TEMPERATURES
+40 to
0F to
ABOVE
+32F
-10F
-50F
CAPACITY
INTERVALS
GAA
GREASE, AUTO-
M - Monthly
(MIL-G-10924)
MOTIVE AND
ALL TEMPERATURES
ARTILLERY
A - Annually
Inner Wheel
Bearing
As req
Outer Wheel
Bearing
As req
Actuator Nut
As req
Rear Support
Leg Actuator
As req
15.
INNER AND OUTER WHEEL BEARINGS. Annually remove, clean, and hand or pressure pack inner and outer
wheel bearings. Clean any existing grease from bearings and hub and drum assembly. Clean surfaces using rags. Hand
pack or pressure pack inner and outer wheel bearings with grease (GAA) and wipe off excess with rag.
16.
ACTUATOR NUT AND REAR SUPPORT LEG ACTUATOR. Monthly lubricate actuator nut and rear support leg
actuator. Clean surrounding areas and all fittings. DO NOT OVERFILL. Add grease to fittings as required and wipe off
excess with rag.
Change 1 3-13