TM 9-2330-381-14
4-43. SERVICE BRAKES (CONT)
REMOVAL
1.
Remove four capscrews (1), lockwashers (2), upper dust shield (3), and lower dust shield (4) from axle assembly
2.
Lift or lower each brake shoe (6) from headless shoulder pins (7) mounted on axle assembly (5) and drive out two
headless shoulder pins (7).
3.
Using brake repair pliers, remove two helical extension springs (8) from brake shoes (6).
4.
Pull and remove two brake shoes (6) from axle assembly (5). Remove helical extension spring (9) from brake
shoes (6) and separate brake shoes.
5.
Remove two return spring pins (10) from brake shoes (6).
6.
Using retaining ring pliers, remove four retaining rings (11), two headless grooved pins (12), and rollers (13) from
brake shoes (7).
4-202 Change 1