TM 9-2330-381-14
4.
Install cover assembly (15) onto support tube (3) passing foot end of strap (7) with anchor (6) down through
support tube. One person must support cover assembly and second person must install four capscrews (13) and
5.
Assemble shim (12) on bolt (11) with convex side of shim downward and, working through stow hole located near
bottom of inner tube (5), insert threaded end of bolt through hole at bottom of inner tube ball joint.
6.
Using extensions, 1-1/8-inch socket, and socket wrench, insert extensions with socket through top of inner tube
assembly and seat socket on head of bolt (11).
7.
One person must use socket wrench, extensions, and socket to hold bolt (11) and second person must position
foot weldment (8) on ball joint of inner tube (5) so that threaded end of bolt (11) protrudes through mating surface
of foot weldment. Second person, using a 1-1/8-inch impact socket and socket wrench, must install slotted nut
(10) and cotter pin (9).
Change 2 4-315