TM 9-2330-381-14
2.
Remove caps/plugs installed into fitting ports on steering control manifold (4) and on tube-to-boss elbow (18).
Install preformed packing (26) onto tube-to-boss elbow (18). Install tube-to-boss elbow (18) into steering control
manifold (4).
3.
Remove caps/plugs installed into fitting ports on steering control manifold (4) and onto straight pipe-to-tube
adapters (10). Install 10 preformed packings (26) onto straight pipe-to-tube adapters (10). Install 10 straight
pipe-to-tube adapters (10) into place on steering control manifold (4).
4.
Remove caps/plugs installed into fitting ports on steering control manifold (4) and on tube-to-boss tees (3). Install
two preformed packings (26) onto tube to boss tees (3). Install two tube-to-boss tees (3) into steering control
manifold (4).
5.
Remove caps/plugs installed onto four tube tees (8) and tube elbow (19). Install four tube tees (8) and tube elbow
(19) onto five straight pipe-to-tube adapters (10) on steering control manifold (4).
6.
Remove caps/plugs installed into fitting ports on steering control manifold (4) and four pressure switches (24).
Install four preformed packings (25) onto four pressure switches (24) and install four pressure switches (23) into
steering control manifold (4).
7.
Remove caps/plugs installed on two hydraulic tubes (23 and 22). Install two hydraulic tubes (23 and 22) between
two tube tees (8) and straight pipe-to-tube adapters (10).
8.
Remove caps/plugs installed on two hydraulic tubes (21 and 20). Install two hydraulic tubes (21 and 20) between
two tube tees (8) and straight pipe-to-tube adapters (10).
9.
Remove caps/plugs installed on two hydraulic tubes (17 and 16). Install two hydraulic tubes (17 and 16) between
two tube tees (3) and tube elbow (19) and tube-to-boss elbow (18).
10.
Using one person, aline and support steering control manifold (4) with hydraulic control module frame (5).
11.
With first person holding steering control manifold (4) in place, use a second person to install three capscrews
12.
Remove caps/plugs installed on two hydraulic tubes (13 and 12). Install two hydraulic tubes (13 and 12) onto two
tube tees (8) on steering control manifold (4) and 4-way directional control valve bank (11).
13.
Remove caps/plugs installed in hydraulic tube (9). Install hydraulic tube (9) onto straight pipe-to-tube adapter (10)
on steering control manifold (4) and 4-way directional control valve bank (11).
14.
Remove caps/plugs installed on two hydraulic tubes (6 and 7). Connect two hydraulic tubes (6 and 7) onto two
tube tees (8) on steering control manifold (4).
4-385