TM 9-2330-381-14
4-91.
HYDRAULIC TANKFILTER (CONT)
FOLLOW-ON MAINTENANCE
4-92.
This task covers:
a. Remove
b. Inspection
c.
Installation
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 1, item 17, appx. B
Drain pan, 4 gl
Goggles, industrial
Extension light, 24 ft
Gloves, chemical and oil protective
Wrench, automotive, adjustable
Wrench, combination, 1 1/4"
Materials/Parts
Dry cleaning solvent item 26, appx. E
Tiedown straps (AR), item 27, appx. E
Preformed packing (20)
Preformed packing (7)
Self-locking nut (2)
Self-locking nut (2)
Equipment Condition
Gooseneck lowered to lowest position, if uncoupled (para. 2-18)
Platform lowered onto support legs to relieve all pressure on suspension gages (para. 2-19)
Gooseneck isolation and suspension isolation shut-off valves pulled out to ADJUST position (para. 2-6)
General Safety Instructions
WARNING
Hydraulic fluid may be absorbed through the skin. Avoid prolonged exposure to
skin and wear long sleeves, gloves, and goggles or face shield. If hydraulic fluid
gets into the eyes, flush them immediately with water and seek medical attention.
If hydraulic fluid gets on skin, wash thoroughly with soap and water. Wash hands
thoroughly prior to eating or smoking.
4-446