TM 9-2330-381-14
6.
Lubricate vacuum seal (10) with petroleum jelly, install vacuum seal (10) on packing nut (5), and install packing
nut in cylinder assembly (9) using spanner wrench.
7.
Install wiper ring (6) with lip away from packing nut (5). Install retaining ring (4) on packing nut (5) by inserting a
flat-tip screwdriver under end of ring and working around ring.
8.
Apply thread locking compound to setscrew (7). Lubricate nylon ball (8) with petroleum jelly and install nylon ball
(8) and setscrew (7).
9.
Apply thread locking compound to two setscrews (1). Install pipe plug (3), two bushings (2), and two setscrews
(1).
5-133