TM 9-4120-411-14
4.14 FRAME COVER ASSEMBLY REPLACEMENT - CONTINUED.
Figure 4-12. Frame Cover Assembly.
(1) Release latch hinges (9) then using two personnel carefully install cover (10) and secure with two rear latch
hinges (9).
(2) Be sure two rear latch hinges (9) are secure then raise and secure cover per paragraph 4.2.
(3) Install flat washer (8), ground lead (7), flat washer (6), new lock washer (5), and nut (4).
(4) Connect cap (2) and plug (3).
(5) Secure outside blower motor cable with two tiedown straps (1).
Cut to remove excess tiedown strap
material.
4-32