TM 3-1040-262-13&P
Table 3-1. Operator's Preventive Maintenance Checks and Services. - Continued
B - Before Operation
A - After Operation
Interval
Procedures
For readiness reporting
Item
Check and have repaired or
equipment is not ready/
No.
B
A
Item to be inspected
adjusted as necessary
available if
AFTER OPER-
sonnel. Release trigger and close
ATIONS
drain cock.
SERVICES -
Any release of pressure through
(Cont.)
the gun indicates that the drain
cock is clogged. Advise organ-
izational maintenance of drain
cock condition upon turn in of
equipment. Record serial number
of disperser in logbook. If all
of the agent in the agent con-
tainer was not expended during
the mission, report this fact to
organizational maintenance per-
sonnel when the disperser is
turned in.
NOTE
To make or break the three lock ring quick disconnect coupling connections, rotate the
sleeve ring until the slot in the sleeve ring is alined with the lock ring pin. Pull back the
sleeve ring and make or break the connection. Release the spring loaded sleeve ring to
secure the quick-disconnect coupling connection. Rotate the sleeve ring so that the slot in
it is not alined with lock ring pin to lock the connection.
3-5