BEB LAUNCH USING CBT (Contd)
LAUNCHING BOAT (Contd)
The high idle switch must be in the OFF position prior to
moving the LHS MODE SELECTION switch. If the MODE
SELECTION switch is moved during high idle sudden
application of hydraulic pressure to the LHS may result in
damage to equipment.
Front ground guide will inform transporter operator when it is
safe to begin operations.
Transporter operator, place transmission in N (neutral) position.
Transporter operator, place transfer case shift lever (2) in LO position.
Transporter operator, release parking brake (1).
Transporter operator, place transmission in R (reverse) position.
Ground guide will signal transporter to stop when top of rear
wheel hubcap becomes even with water level.
10. Transporter operator, back transporter (4) into water, stop when top of rear
wheel hubcap (3) becomes even with water level.
11. Transporter operator, set parking brake (1).