TM
9-2320-279-10-2
Preparation for Transport and Operation (Cont)
E-13. EQUIPMENT BODY REMOVAL/INSTALLATION (CONT).
(34) Disconnect four heavy-duty winch hydraulic hoses (32) and pull toward
vehicle engine through hole in equipment body.
(35) Connect hvdraulic hoses (32) together.
(36) Install dust cap (33) on fitting (34).
CAUTION
Make sure lifting device does not interfere with winch
motor or hydraulic hoses. If lifting device catches on
motor or hoses it may damage equipment.
NOTE
16-foot (5m) safety chain and pallet sling from
q
stowage should be used for lifting.
Vehicle onboard crane may be used to remove
q
equipment body. If other than onboard crane is used,
skip step (37) and start with step (38).
(37) Prepare onboard crane for
operation with
remote control (para 2-64a).
(38) Attach suitable lifting device to four corner lifting eyes (35).
E-10