TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
a. ENGINE SYSTEM (CONT)
a6.
TOO MUCH VIBRATION IN ENGINE (CONT).
(c)
If vibration damper bolts are loose or missing or vibration damper is damaged, notify Unit
Maintenance.
(d)
Lower cab (para 2-28b).
(e)
If engine still vibrates too much, notify Unit Maintenance.
Notify Unit Maintenance.
Step 1. Check for proper engine oil level.
(a)
Raise cab (para 2-28a).
(b)
Check engine oil level (para 2-18, item 34).
(c)
(d)
If engine oil level is high, notify Unit Maintenance.
Step 2. Check for Class II and Class III oil leaks.
(a)
Visually check oil lines, engine block, and oil filter for Class II and Class III oil leaks.
(b)
If Class II and/or Class III oil leaks are found, notify Unit Maintenance.
(c)
Lower cab (para 2-28b).
(d)
If oil consumption is still excessive, notify Unit Maintenance.
Perform Cooling System Troubleshooting (d1. Engine Overheats).
Step 1. Check for restricted air filter (para 2-27a or b).
(a)
(b)
If air filter element will not clean, notify Unit Maintenance.
Step 2. Check air cleaner hoses and pipe for kinks and damage.
(a)
Check air particle restriction hose for kinks and damage.
(b)
Raise cab (para 2-28a).
Change 1