TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NO OVERSPEED WARNING LIGHT AND/OR OVERSPEED PRESSURE CHANGE.
Notify Unit Maintenance.
AXLE DIFFERENTIAL(S) NOISY.
Notify Unit Maintenance.
Step 1. Check tire pressures with tire gage for each CTIS setting.
Notify Unit Maintenance if tire pressures do not match those given below:
ALL MODELS EXCEPT M1088 AND M1089
MODELS M1088 AND M1089
HWY Mode
60 psi (414 kPa)
HWY Mode
81 psi (558 kPa)
X-C Mode
37 psi (255 kPa)
X-C Mode
54 psi (372 kPa)
SAND Mode
22 psi (152 kPa)
SAND Mode
32 psi (221 kPa)
EMER Mode
16 psi (110 kPa)
EMER Mode
24 psi (165 kPa)
Step 2. Raise cab (para 2-28a).
CAUTION
Do not overfill power steering reservoir. Failure to comply may result in damage
to equipment.
Step 3. Check that steering reservoir is filled to proper level. Oil should be level with full mark
on dipstick.
(a)
Add oil as required.
Change 1