TM 9-2320-366-10-2
This task covers:
a. Caging
c. Follow-On Maintenance
b. Uncaging
INITIAL SETUP
Equipment Conditions
Tools and Special Tools (Cont)
Engine shut down (para 2-27f).
Wrench, Adjustable, 8 in. (Item 50,
Tools and Special Tools
Personnel Required
(2)
WARNING
Wear appropriate eye
protection when working under
vehicle due to the possibility of
falling debris.
Failure to
comply may result in injury to
personnel.
a. Caging.
NOTE
To cage brakes, apply
caging procedure to both
top and bottom spring
brake chambers.
(1) Remove nut (1) and washer (2) from
caging bolt (3).
(2) Remove caging bolt (3) from caging
bolt holder (4).
Change 1