TM 9-2330-203-14&P
4-37.
HUB, WHEEL BEARING, AND BRAKEDRUM MAINTENANCE (Con't).
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area has
been properly cleaned. There may be asbestos dust on these components which can be
dangerous if you touch It or breathe it. Wear an approved filter mask and gloves. Never
use compressed air or a dry brush to clean brake components. Dust may be removed
using an industrial-type vacuum cleaner. Clean dust or mud away from brake components
with water and a wet, soft brush or cloth. Failure to follow this warning may result in
serious illness or death to personnel.
NOTE
It may be necessary to back off brake adjustment to remove brakedrum (para 4-18).
4.
Remove hub (19) and brakedrum (5) as an assembly from axle spindle.
TA510727
4-89