TM 9-2330-203-14&P
4-38.
WHEEL AND TIRE ASSEMBLY REPLACEMENT.
This Task Covers:
a. Removal b.
Installation
Initial Setup:
Tools/Test Equipment:
General mechanic's tool kit
Jack
NOTE
Nuts for the right wheel (marked R) have right-hand threads. Nuts for the left
wheel(marked L) have left-hand threads.
M1 98 and M198A1 have ten nuts securing Inner and outer wheel and tire
assembly.
a.
REMOVAL
1.
Loosen six nuts (4) securing outer wheel and tire assembly (3).
2.
Position jack under axle where wheel and tire assembly are to be removed. Raise axle until tires clear ground.
3.
Remove six nuts (4) and outer wheel and tire assembly (3).
4.
Remove six capnuts (5) and inner tire and wheel assembly (2) if replacement is required.
4-94