TM 9-2330-205-14&P
MAIN HARNESS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
Using screwdriver, push through holes (3).
Seven grommets (2)
2.
Chassis (1)
Pull out and separate.
Three mated con-
Clip
3.
nectors (5 and 6)
assemblies (4)
Pull through holes (3) in chassis frame
Main harness (7)
4.
Chassis (1)
and remove.
Remove.
Seven clamps (8)
5.
Main harness (7)
Remove.
Seven grommets (2)
6.
INSTALLATION
Install through holes (3).
Main harness (7)
Chassis (1)
7.
Three mated con-
Match and push firmly together.
Main harness (7)
8.
nectors (5 and 6)
Snap into place.
Three mated con-
Clip
9.
assemblies (4)
nectors (5 and 6)
Seven grommets (2)
Install at proper locations.
Main harness (7)
10.
Seven grommets (2)
Using screwdriver, carefully work into
Chassis (1)
11.
holes (3).
Install at the proper locations.
Seven clamps (8)
12.
Main harness (7)
Using 7/16-inch socket and screwdriver,
Seven screws (9),
13.
Seven clamps (8)
attach to chassis (1).
seven Iockwashers
(10), and seven
nuts(11)