TM9-2330-207-14
Section II. MAINTENANCE PROCEDURES
Page
Page
Overview
Servicing of Air Reservoir
Cleaning of Landing Gear Legs
3-4. OVERVIEW
This section contains maintenance procedures to be performed by the operator which consist of the
following:
Cleaning of landing gear legs
Servicing of air reservoir
Remove all power from vehicle prior
to making any repairs on electrical
system.
a. Use a soft cloth to remove any buildup of grease,
dirt, etc.
Cleaning solvent (Fed.Spec PD-680) is
both toxic and flammable. Avoid pro-
longed breathing of vapors. Avoid
skin contact. Use only in well-ventilated
area. Keep away from open flame.
b. Use a small brush and cleaning solvent (PD-680)
connector.
c. Allow to dry.