Table 4-3. Organizational Troubleshooting Table - Continued
TEST OR INSPECTION
2. IMPROPER SPRING ACTION (cont).
Step 3. Check springs for broken leaves, center bolts or clips (para. 4-65).
If center bolts, or clips are broken, replace center bolts or clips (para. 4-65).
3. EXCESSIVELY WORN, SCUFFED, OR CUPPED TIRES.
Step 1. Check tire pressure.
If tire pressure is not 60 psi, inflate tires to 60 psi.
If tire pressure is 60 psi, proceed to step 2.
Step 2. Check for loose wheels.
If wheels are loose, tighten wheel rim nuts and cap nuts (para. 4-30).
If wheels are not loose, proceed to step 3.
If wheel bearings are not loose, proceed to step 4.
Step 4. Check for bent wheel.
If wheel is not bent, proceed to step 5.
Step 5. Check for deformed, cracked or scored brake drum.
If brake drum is cracked or deformed, replace brake drum (para. 4-32).
If brake drum is scored, notify Direct Support maintenance.
If brake drum is not defective, proceed to step 6.
Step 6. Check for broken or disconnected torque rod.