TM 9-2330-213-14&P
4-28. HANDBRAKE LEVER REPLACEMENT (ALL EXCEPT M107A1).
This Task Covers:
Installation
Removal
b.
a.
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
General mechanic's tool kit
One cotter pin
a.
REMOVAL
WARNING
If trailer is not coupled to towing vehlcle, ensure that wheels are securely chocked.
Failure to do so may cause trailer to roll, resulting in lnjury to personnel or damage
to equipment.
Remove cotter pin (3), flatwasher (2), clevis pin (9), and disconnect clevis (5) from handbrake lever (1).
1.
Discard cotter pin.
Remove two nuts (6), Iockwashers (7), screws (8), and handbrake lever (1) from crossmember (4).
2.
Discard Iockwashers.
b. INSTALLATION
Install handbrake lever (1) on crossmember (4) with two screws (8), new Iockwashers (7), and nuts (6).
1.
2.
Connect clevis (5) to handbrake lever (1) with clevis pin (9)., flatwasher (2), and new cotter pin (3).
FOLLOW-ON TASKS:
_
TA506264