TM 9-2330-213-14&P
This Task Covers:
a. Disassembly
c.
Assembly
b. Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Common No. 1 shop set
Retaining ring pliers
a.
DISASSEMBLY
1.
Remove nut (4) from handle (1) and housing (14).
Remove flatwasher (5), sleeve (6), two pins (9), ratchet pawls (7), and springs (8). Remove handle (1),
2.
spring (2), and ball bearing (3) from housing (14).
3.
Remove housing (14) from tube assembly (13).
4.
Remove retaining ring (12), ratchet wheel (11 ), and screw (10) from housing (14).
TA505312