BLACKOUT STOPLIGHT ASSEMBLY - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
Using 1/2-inch socket and ratchet handle
Screw (3) and
2. Bracket (1)and
with 3/8-inch drive, unscrew and take
Iockwasher (4)
blackout stoplight
out.
assembly (2)
Lift up, and take off.
Blackout stoplight
3. Bracket (1)
assembly (2)
LAMP, LENS, AND DOOR ASSEMBLY REPLACEMENT
a. Using 3/16-inch flat-tip screwdriver,
Two screws (6)
4. Blackout stoplight
unscrew and take out.
body (5)
b. Using 3/16-inch flat-tip screwdriver,
pry off door and lens asembly (6).
5. Door and lens
Gasket (8)
Using 3/16-inch flat-tip screwdriver,
assembly (7)
pry out.
Lamp (9)
Push in, turn one-quarter turn
6. Blackout stoplight
body (5)
counterclockwise, and take out.
Lamp (9)
Place in socket (10), push in, and turn
7.
one-quarter turn clockwise.
Place in groove.
8. Door and lens
Gasket (8)
assembly (7)
Door and lens
Place in position on blackout stoplight
9. Blackout stoplight
body (5)
body (2).
assembly (7)
Two screws (6)
Screw in and tighten, using 3/16-inch
10.
flat-tip screw driver.
If only repairing lamp, lens or
door assembly, go to FOLLOW-ON
MAINTENANCE.
INSTALLATION
Blackout stoplight
Line up bracket stud (11) with small hole
11. Bracket (1)
assembly (2)
on blackout stoplight body, and place
onto bracket.
End connector (13)
Feed through frame hole (14), and push
12. Wire harness
lead (12)
into blackout light assembly body (2).