WHEELS CYLINDERS, ONE-WHEEL CYLINDER OPTION BRAKES
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Pan, drain
Personnel Required
Socket, 1/2-inch drive, 9/16-inch
Wrench, box-end, 7/16-inch
One
Wrench, box-end, 3/4-inch
Equipment Condition
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
Both sets of wheel cylinders are removed and installed the same way. This task is for
one set; repeat for the other. Have drain pan ready to catch hydraulic fluid spillage.
Bolt (2)
a. Put drain pan under.
1. Wheel cylinder (1)
b. Using 3/4-inch box-end wrench,
and connector (3)
unscrew and take off.
2. Wheel cylinder (1)
Bleeder screw (4)
Using 7/16-inch box-end wrench,
unscrew and take out.
Two screws (6)
3. Backing plate (5)
handle with 1/2-inch drive, unscrew
and Iockwashers (7)
and wheel
and take out.
cylinder (1)
4. Backing plate (5)
Wheel cylinder (1)
Take off.
and shield (8)
INSTALLATION
5.
Put in place
Shield (8) and
wheel cylinder (1)
4-106