TM 9-2330-227-14&P
WIRE HARNESS, 24- VOLT, RUNNING LIGHTS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Two clamps (14)
a. Position at marked mounting holes.
43. Harness
b. Put on harness.
branch (6)
Two screws (15)
Screw in, and tighten using number two
44. Two clamps (14)
cross-tip screwdriver.
Harness branch (4)
Repeat steps 40 thru 44.
45.
Harness branch (6)
Place in position.
46. Right front
corner (16)
Put on.
Four clamps (17)
47. Harness
branch (6)
Four screws (18)
Screw in, and tighten using 3/8-inch
48. Four clamps (17)
and nuts (19)
flat-tip screwdriver and 7/16-inch
box-end wrench.
Harness branch (4)
Repeat steps 46 thru 48.
49. Left front
corner (20)
5-19