TM 9-2330-235-14&P
4-48.
RETRACTABLE SUPPORT ASSEMBLY MAINTENANCE (M514) (Con't).
4. Raise retractable support assembly to stowed
position. Check to see that gravity pin (29) can
be inserted without binding through hole in frame
clevis (28) and swivel (6). If necessary, loosen
nuts (24) and shift retractable support assembly
until gravity pin can be removed and inserted
without binding. Tighten nuts after adjustment.
FOLLOW-ON TASKS:
Lubricate retractable support assembly (Chapter 3, Se
Remove jackstands from frame.
TA505054
4-113