TM 9-2330-235-14&P
4-49.
RETRACTABLE SUPPORT ASSEMBLY MAINTENANCE (M390C).
This Task Covers:
a. Removal
d.
Assembly
b. Disassembly
e.
Installation
c. Cleaning and Inspection
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
Dry cleaning solvent (Item 13, Appendix E)
General mechanic's tool kit
Two cotter pins
Common no. 1 shop set
Three locknuts
Floor jack
Two jackstands
a.
REMOVAL
1. Raise front of trailer and position two jackstands under chassis.
2. Remove locknut (1), washer (2), and bolt (4) from yoke (9) and frame (3). Discard locknut.
3. Pull out on release handle (7) and remove retractable support assembly (8) from frame (3).
4. If release handle (7) is damaged, remove two pins (6), release handle, and spring (5) from retractable support
assembly (8).
TA704340
4-114