4-29. MARKER CLEARANCE LIGHT MAINTENANCE.
This Task Covers:
Intervehicular cable disconnected from semitrailer
General mechanic's tool kit
All marker clearance lamps are replaced the same way.
Remove two screws (1), retainer (2), and lens (3) from plate (6).
Push in and turn lamp (5) counterclockwise and remove from plate (6).
Install lamp (5) in plate (6) and turn clockwise,
The word BOTTOM is printed on blackout marker clearance light lens. Ensure that lens
is positioned properly when Installed.
Install lens (3) and retainer (2) on plate (6) using two screws (1).