TM 9-2330-251-14&P
4-21. CHASSIS WIRING HARNESS REPLACEMENT (Con't).
4.
Remove 6 connectors (15) from 2 clip assemblies (14). Disconnect connectors.
Remove 10 screws (2) from clamps (6) securing chassis wiring harness (1) to right framerail (3),
5.
crossmember (7), and left framerail (8).
Remove 10 clamps (6) from chassis wiring harness (1).
6.
7.
Remove 3 grommets (9) and discard.
Remove chassis wiring harness (1) from trailer.
8.
b. INSTALLATION
1.
Position chassis wiring harness (1) for installation.
2.
Install 3 new grommets (9).
Install 10 clamps (6) on chassis wiring harness (1).
3.
4.
Secure clamps (6) to right framerail (3), crossmember (7), and left framerail (8) with 10 screws (2).
5.
Connect 6 connectors (15) and insert in 2 clip assemblies (14).
Install cover (11) on drawbar (10) with 4 new Iockwashers (12) and screws (13).
6.
7.
Connect 4 connectors (5) and insert in 2 clip assemblies (4). Repeat for opposite side.
FOLLOW-ON TASKS:
Connect intervehicular cable to towing vehicle (para 2-6).
q
q Check operation of lights.
TA503909
4-23