TM 9-2330-285-14&P/TO 36A11-21-10-1
MASTER CYLINDER
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Brake fluid, type BFS
9/16-inch wrench
1-inch open end wrench
5/8-inch wrench
3/4-inch wrench
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
This procedure is typical for the front and rear brake
systems.
1 Master cylinder (1)
Screw (2), washer
Remove using a 3/4-inch wrench.
(3) and tee (4)
Three nuts
Remove using a 9/16-inch wrench.
2 Mounting
(6) and three
Remove master cylinder, being careful
bracket (5)
washers (7)
that the brake chamber does not come
off.
INSTALLATION
Master
Slide onto three studs (8).
3 Mounting
cylinder (1)
bracket (5)
Three nuts
Secure master cylinder (1) using a 9/16-inch
4
wrench.
(6) and three
washers (7)
Tee (4), screw
Install parts using a 3/4-inch wrench.
5 Master cylinder (1)
(2) and washer (3)