TM 9-2330.297-14&P
MAIN CHASSIS HARNESS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
8. Semitrailer
Main harness
a. Pass end of harness (20) through
chassis
receptacle (14)
hole (15).
b. Install plastic tubing (16) over five
wires (17).
c. Using wire strippers, strip 1/2 inch
(12.7 millimeters) from ends of wires
(17) and form end into a hook.
d. Using screwdriver, secure wires (17) to
their respective terminals, as shown in
the figure below.
e. Slide plastic sleeve (16) over terminals.
f. Using electrical tape, wrap terminal end
of receptacle (14).
g. Place receptacle (14) on chassis.
h. Using screwdriver, install screws (18).
9. Main harness
Rear harness
Push plug (19) into receptacle (14).
receptacle (14)
plug (19)
TASK ENDS HERE
TA223126
4-31