TM 9-2330-356-14
(goggles and gloves) and use caution to
WARNING
avoid injury to personnel.
Dry cleaning solvent P-D-680 is toxic and
(3) Clean the screen in dry cleaning solvent
Always wear protective
flammable.
goggles and gloves, and use only in a well-
and to remove any excess material.
ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe va-
(4) Replace screen in spout and then replace
pors. DO NOT use near open flame or ex-
spout on nozzle.
cessive heat. The solvent's flash point is
100F-138F (38C-59C). If you be-
Nozzle Replacement. Should nozzle need
b.
come dizzy while using cleaning solvent,
replacement, notify unit maintenance.
immediately get fresh air and medical help.
If solvent contacts eyes, Immediately wash
your eyes with water and get medical aid.
Compressed air used for drying or clean-
ing purposes must not exceed 30 psi
(207 kPa). Wear protective clothing
(goggles and gloves) and use caution to
avoid injury to personnel.
(3) Clean the screen in dry cleaning solvent
and to remove any excess material.
(4) Replace screen in spout and then replace
spout on nozzle.
b . Removal.
(2) Pull nozzle from hose.
3-15. Overwing Nozzle (M970 and M970A1)
a.
be cleaned periodically and whenever flow is restricted
through nozzle.
(2) Remove screen from within the spout.