LOADING AND UNLOADING ABLE PAYLOADS (CONT)
(b) Operate two angled load binders (18) to loosen two angle rear payload tiedown chains (24 and 25).
(c) Disconnect both angle chains (24 and 25) from angled load binders (18).
(d) Payload operator must release payload brakes.
(e) Operate two parallel load binders (18) to tighten both curbside and streetside tiedown chains (20 and 22
or 20, 22, and 23).
(f) Continue to tighten each load binder as tightly as possible to move payload slightly off of two rear payload
chocks (9) or at least reduce pressure applied on rear chocks by payload.