STOP LIGHT/TAIL LIGHT (CONT)
Install gasket (7), light lens (6), and retaining ring (5) into stop light/tail light (4).
Aline and install stop light/tail light (4) to platform. Secure in place with three screws (3), clamp (2.1), and three
Reconnect stop light/tail light socket connector (1) to W2 harness.
Reconnect intervehicular electrical cable and check stop light/tail light for proper operation (para. 2-24).
This task covers:
General mechanics tool kit, item 16, appx. B
Semitrailer parked on level ground, parking brakes applied, and intervehicular cables disconnected (para. 2-24)
The following procedure is to be used for all clearance lights located on either the
curbside or streetside of platform. To repair or replace all clearance lights, repeat
this procedure as necessary.
Tag and disconnect clearance light socket connector (1) from platform wiring harness.
4-110 Change 1