TM 9-2330-383-14&P
3-5.
WHEELS AND TIRES (CONT)
(3)
Place vehicle stand under axle between jack and wheel being changed. DO
NOT remove jack.
(4)
Lower vehicle onto jack stand.
(5)
Remove wheel nuts.
________
WARNING
Wheels and tires are heavy. To avoid personal injury, use two people
when handling wheels and tires.
(6)
Using two people, remove defective tire and wheel.
b. Repair.
For repair of wheels and tires, refer to TM 9-2610-200-24.
c. Installation. For bias ply tires, check spare tire for 100 psi air pressure
(highway) or 65 psi (off-road). For radial tires, check spare tire for 105
psi for all conditions.
________
WARNING
Wheels and tires are heavy. To avoid personal injury, use two people
when handling wheels and tires.
(1)
Using two people, place a spare tire and wheel (para. 2-16) on the axle
lugs by alining bolt holes with lugs and using the jack very carefully
to raise or lower axle as needed to fit wheel onto lugs. Hand tighten
lug nuts.
(2)
Using the jack, raise trailer. Remove vehicle stand and lower trailer
until tire touches the ground.
Change 1