4-60. NOSE ADAPTER REPLACEMENT.
4-38 SERVICE and EMERGENCY air cou-
plings removed from nose adapter.
Personal Required: Two
4-14 Voltage control unit removed.
Tool kit, general mechanic's
Remove four locknuts (9), wash-
ers (8), and screws (5). Remove
two storage brackets (6) for
dummy couplings (7) from nose
adapter (1). Let dummy cou-
plings hang from fuel warning
placard (2). Discard locknuts.
Remove four locknuts (10), eight
starwashers (3), and four screws
(4). Remove fuel warning placard
(2) and dummy couplings (7).
Remove nose adapter (1) from
locknuts and starwashers.
(1) Thread cable loops of dummy
couplings (7) through fuel warn-
ing placard (2) extensions. Install
nose adapter (1) and fuel warning
placard to mounting brackets with
four screws (4), eight new star-
washers (3) and four new
Install two storage brackets (6) for dummy couplings (7) to nose adapter (1) with four screws
(5), washers (8). and new locknuts (9). Hang dummy couplings on storage brackets.
Install SERVICE and EMERGENCY air couplings to nose adapter (see paragraph 4-38).