TM 9-2330-388-14
(1) Remove tool box contents and set aside.
4-61.
(2) Place a support under tool box to support it
a.
Replacement.
when mounting screws are removed.
NOTE
(4) Remove two capscrews (1) and nuts (2).
On some semitrailers, tools box may be tack
welded in position. Break weld with a cold
(5) Remove four capscrews (3) and nuts (4),
chisel to remove tool box. Do not reweld
and remove tool box (5).
when installing tool box.
(6) Install tool box by reversing steps (1)
through (5).
b.
Disassembly and Assembly. Remove and install
1. Capscrew (2)
2. Nut (2)
3. Capscrew (4)
4. Nut (4)
5. Tool Box
6. Cover
7. Capscrew
8. Angle (2)
9. Nut (2)
10. Screw
11. Catch
12. Nut
13. Rubber Catch
14. Screw (2)
15. Nut (2)
Figure 4-67. Tool Box
4-133