The following paragraphs contain illustrations that show the location of each control for the
M1082/M1095 series trailers. Each control is clearly labeled as it appears on the trailers. Find numbers
on the illustration are keyed to the tabular listing which contains the name and the functional
description of each control. Operator must become thoroughly familiar with this section before
attempting to operate trailer. Controls are identical for LMTV (M1082) trailer and MTV (M1095) trailer
unless otherwise indicated.
Table 1 describes all controls on the exterior of the trailer.
Table 1. Exterior Controls.
Rear composite taillights
Two composite taillights located on the rear trailer
bumper. Each contains tail, stop, and turn lights
plus blackout tail and blackout stop lights. Towing
vehicle controls each light.
Three red identification lights centered at the
trailer rear on the crossmember. Illuminate when
towing vehicle drive lights or parking lights are on.
Amber clearance lights
Two lights located on the front trailer corners.
They illuminate when towing vehicle drive lights or
parking lights are on.